1. Secondary LED Optics Design
The lenses of our street lights are made with the best PMMA, with over 90% light transmission. They are resistant to UV and ozone. We can satisfy the most demanding technical requirements with a different number of positions for the lenses. Our street lamps cause low glare.
2. MeanWell/ OSRAM LED Power Supply
With lightning protection, anti-surge, high and low voltage protection, overload protection, these high quality power supplies ensures our led street lights working well in harsh condition.
3. Philips/ OSRAM/ CREE LED
Philips/ OSRAM/ CREE LED chips are used to ensure long lifespan to 50,000hours, very low light attenuation, high CRI>80, high efficiency.
4. Mechanical Structure
The structure is made of cast and extruded aluminum. Castings are painted with powder coating and are thermally treated. The anodized extruded parts is at least 20 microns. The housing ensures IP66 and IK10. All screws are made of stainless steel.
5. Thermal Management
The thermal management of the LED housing and plates allows sufficient heat dissipation, so that the LEDs and the driver can operate at safe temperatures and guarantee its long life. In case of overheating, the driver automatically reduces the current to protect the lamp.
6. Easy Installation
Street lamp can be installed without additional adapters to the pole or support. After the final installation, you can change the angle of inclination of -15 degrees to 15 degrees. The cables can be connected via terminals pressure.
7. Perfection in Production
We only use the best components and brands to produce our lighting. The PCB is automatically assembled on the production line, each panel is controlled to 100% optical and electrically. Every street lamp is electrically tested following a special protocol with certified equipment.
Contact: Ms. Wendy Hu
China Professional Led Light Designer And Manufacturer.